Cisco 6500 installation manual

Catalyst Series Switch Module Installation Guide Page 6. The minimum link distance for ZX GBICs is miles (10 km) with an 8-dB attenuator installed at each end of the link. Without attenuators, the minimum link distance is miles (40 km).  · For ground connection installation instructions, see the “Establishing the System Ground” section. Step 2 Remove the power supply from its shipping container and remove any packaging. Step 3 Verify that source DC is off to the DC circuit that feeds the power supply that you are installing. As an added precaution, place the appropriate safety flag and lockout devices at the source .  · Note In this publication, the term Catalyst series refers only to the switch chassis listed in Chapter 1. The Catalyst series switches (Catalyst and Catalyst switches) are described in a separate publication, the Catalyst Series Switch Installation Guide.

Cisco Video Surveillance PD IP Camera Installation Guide Preface Overview This document, Cisco Video Surveillance PD IP Camera Installation Guide, provides information about installing and deploying the Cisco Video Surveillance PD High-Definition IP Camera. Organization This manual is organized as follows. A center rack-mount kit for inch, telco-style racks is available as an option for both the Catalyst and the Catalyst E switch chassis. The kit is not included in the accessory kits, but is available as a separately orderable item (p/n WS-C=). Installation instructions are included with the kit. For instructions on installing and replacing modules, refer to the Catalyst Series Ethernet Modules Installation Guide. Removing and Installing the AC-Input Power Supplies. This section describes how to remove and install AC power supplies in the Catalyst series chassis.

Cisco Series Installation and Configuration Guide. DOCICG= Catalyst 60Series Module Installation Guide. DOC Remove the supervisor engine from the Catalyst series switch. (Refer to the Catalyst Series. Module Installation Guide for removal instructions.). From the Cisco website Catalyst Ethernet Module Installation Guide document: Module types included in this installation manual.